SPARE Plan Submittal Requirements
SPARE plans are stored in the Planwell system, a highly
secure system with access limited to the Public Safety
Department, the City Manager and key Building Department
personnel. (Other than Public Safety, these are the same
people that have access to the complete building plans for
the address in question.) There is NO public access to ANY
of the plans stored in our system, including the SPARE
plans.
SPARE plans must be submitted on a CD/ROM in a read-only
format and should be limited to only the floor plan overview
pages. Accessory buildings, if any, should be submitted on
their own page(s). If possible, though not required, SPARE
plans should show as little of the detail required to
construct the structure (i.e. headers, floor and ceiling
structures, etc.) The SPARE plan should be a floor-by-floor,
skeletal overview with the following items highlighted in
RED:
- Utility shut-off locations (gas meter, electrical
meter and panel, and water main)
- Location of stairways and elevators
- Bedroom locations with egress windows shown
- Exterior door locations
- Location of any hazardous material storage (i.e.
oxygen tanks, gas tanks for welding purposes, workshops,
etc.)
- Special suite locations for the elderly, physically
challenged, and infants ot toddlers
- Identify any excess storage of motorized vehicles
beyond the obvious garage bays (i.e. automotive lifts)
- Location of gun collections/ammunition and how
protected from fire or explosions.
- Clearly identify the address on each page. Owner’s
names MUST be omitted from all pages.
Additional text information can be shown (in red) in the
blank fields with arrows directing attention to the space in
question.
Form to Submit Your Plan
|